JLab Studio Pro ANC
Is the Studio Pro ANC right for you?
The Studio Pro ANC is JLab's wireless over-ear headphone with hybrid active noise cancelling, connecting over Bluetooth 5.
Best for
- Long stretches between charges. JLab quotes 45+ hours of Bluetooth playtime, or 43+ hours with ANC, plus 7 hours from 10 minutes of charging.
- Choosing how much of the room you hear. JLab lists four noise control modes: ANC (High), ANC (Low), ANC Off and Be Aware.
Skip if
- You're counting on the AAC codec. JLab's product page lists SBC and AAC, while its support tech specs list SBC.
Want to see it next to a keyboard and a mouse? Try it on the QuickDesker board and build a whole desk setup around it.
What does it cost, and what should you check first?
- Seen at Best Buy for $99.99 (Black) on 21 Sep 2026
- Seen at JLab.com for $99.99 (Black) on 16 Oct 2026
- Seen at Walmart for $99.99 (Black) on 21 Sep 2026
Prices change, so check the current one before you buy. JLab's product page shows it in Black. It charges over USB-C, and JLab gives the charge time as 1 hour, 43 minutes on its support tech specs page and 2 hours on its product page. JLab's box list names the headphones, a USB Type-C charging cable, a 3.5mm AUX-IN cable and a travel bag. The warranty is JLab's 2 year warranty.
How does the Studio Pro ANC's noise cancelling work?
JLab lists the cancelling as hybrid. Active cancelling picks up outside sound through microphones and plays an opposing signal to cancel it; hybrid means it listens both outside and inside the ear cup.
JLab describes Be Aware as pass-through for outside noises. JLab says its app adjusts the Be Aware settings and offers EQ presets including JLab Signature, Balanced and Bass Boost.
JLab lists 2-mic ENC, its environmental noise canceling microphones. ENC cleans up your voice for the person on the other end of a call; it doesn't quiet the room for you. There's more on how hybrid cancelling differs from a noise-cancelling microphone in our guide: What “noise cancelling” actually means on a headphone box.
How does the Studio Pro ANC connect, and what do its audio specs say?
It uses Bluetooth 5, and JLab gives a range of 30+ feet. A codec is how music is compressed for the wireless link.
JLab lists latency under 200ms in its Movie Mode.
For the sound hardware, JLab lists 40mm dynamic drivers and an impedance of 32 ohms. There's more on what driver size and impedance tell you in our guide: What do headphone specs actually mean? Frequency response, impedance and driver size.
Full specifications
| How it is worn | over-ear headphones |
|---|---|
| Connections | Bluetooth |
| Active noise cancelling | Hybrid |
| Codecs | SBC, AAC (product page) · SBC (support tech specs) |
| Battery life | 43+ Hours (with ANC) |
| Weight | 222 (Total, g) |
| Transparency / ambient mode | Yes (Be Aware) |
| Microphone noise reduction | 2-mic ENC |
| Bluetooth version | Bluetooth 5 |
| Battery life, as quoted | 45+ Hours Bluetooth Playtime |
| Driver diameter | 40mm |
| Driver type | Dynamic |
| Impedance | 32 ohms |
| Frequency response | 20-20 kHz |
| Microphone | 5 x MEMS |
| Folds | Yes |
| Companion app | JLab App |
| Sensitivity | 110 +/-3dB |
| Charging port | USB-C |
| Quick charge, as quoted | 10 minutes = 7 hours |
| Bluetooth range | 30+ feet |
| Dimensions | Product Height (in.) 7.48, Product Length (in.) 5.71, Product Width (in.) 3.09 |
| Warranty | 2 year warranty |
| In the box | Studio Pro ANC Wireless Headphones, USB Type-C Charging Cable, 3.5mm AUX-IN Cable, Travel Bag |
JLab's Studio Pro ANC product page and support tech specs page don't list multipoint connection or a passive isolation claim.
Specifications from JLab's Studio Pro ANC product page and support tech specs page, read 21 Sep 2026.