Audio-Technica ATH-M20x

Is the ATH-M20x right for you?
The ATH-M20x is a closed-back headphone, which Audio-Technica's product page calls over-ear in one paragraph and on-ear in another.
Best for
- Studio tracking and mixing. That's the job Audio-Technica says it's designed for.
Skip if
- You'll wear it on a noisy commute. Reviewers found its isolation average at best.
- You want a case to carry it in. Reviewers noted it comes without a case or bag.
Want to see it next to a keyboard and a mouse? Try it on the QuickDesker board and build a whole desk setup around it.
What does it cost, and what should you check first?
- Seen at Audio-Technica US store for $59.00 (Black) on 12 Nov 2026
- Seen at Audio-Technica.com for $59.00 (Black) on 9 Nov 2026
- Seen at Sweetwater for $59.00 (Black) on 12 Nov 2026
Prices change; check the one for the colour you want. Audio-Technica sells it in Black and White.
The cable is 3.0 m (9.8') long and straight, with a left-side exit. Audio-Technica puts the weight at 190 g (6.7 oz) without cable and connector, and calls it lightweight yet durable.
Audio-Technica's US warranty page gives two years from the date of purchase on select products bought in the U.S.A. from an authorized Audio-Technica dealer.
What do the ATH-M20x's driver and impedance figures mean?
Audio-Technica lists 40 mm dynamic drivers and an impedance of 47 ohms. Its stated frequency response runs from 15 to 20,000 Hz. Impedance is the electrical load a headphone presents to whatever drives it, and on its own it says nothing about sound quality. Our guide goes through what each figure can and can't tell you: What do headphone specs actually mean? Frequency response, impedance and driver size.
Audio-Technica says it's tuned for enhanced low-frequency performance. On bass, the reviews part ways: one found the sound balanced, with some warmth and bass; another found it didn't supply enough bass for bass-heavy music.
What do reviewers say about its isolation?
Audio-Technica says the circumaural design contours around the ears for excellent sound isolation in loud environments. The reviews are cooler. One found it blocks little outside noise and is better kept to quiet indoor use than commuting; another rated the isolation average, with attenuation peaking at roughly 35 dB around 8 kHz.
Full specifications
| How it is worn | over-ear (opening paragraph) · on-ear (sound isolation paragraph) |
|---|---|
| Active noise cancelling | Not listed on Audio-Technica's ATH-M20x product page |
| Weight | 190 g (6.7 oz), without cable and connector |
| Back design | Closed-back |
| Passive isolation claimed | Circumaural design contours around the ears for excellent sound isolation in loud environments |
| Driver diameter | 40 mm |
| Driver type | dynamic |
| Impedance | 47 ohms |
| Frequency response | 15 - 20,000 Hz |
| Cable length | 3.0 m (9.8'), straight, left-side exit |
| Sensitivity | 96 dB |
| Warranty | TWO YEAR LIMITED END USER WARRANTY |
| In the box | 6.3 mm (1/4") snap-on adapter |
Audio-Technica's ATH-M20x product page doesn't list water resistance or dimensions.
Specifications from Audio-Technica's ATH-M20x product page and US limited warranty, read 12 Nov 2026.